Kessler MOTION CONTROL: elektraDRIVE Basic Controller (iOS Manuel d'utilisateur télécharger pdf

elektraDrIVe BaSIC CONtrOller GuIDe

aVaIlaBle MODeS

The Basic Controller offers three user

selectable operation modes.

• MOMENTARYMODE:

This mode allows you to move the

slider as long as a directional button

is pressed. Variable speed can be

adjusted “on the y” while the car-

riage is in motion. This mode is indi-

cated by a Green LED.

• CONTINUOUS(TOGGLE)MODE:

This mode allows you to set up a

move and let it move without holding

down any buttons like in Momentary

Mode (press once to start and again

to stop). This mode is indicated by an

Orange LED.

• PULSEMODE:

This mode allows you to make ultra-

slow movements that can be used for

basic time lapses. This mode is indi-

cated by a Red LED.

The elektraDRIVE BASIC Controller is for use with the elektraDRIVE mo-

tor conﬁgurations for the Pocket Dolly or CineSlider, when the advanced

features of our ORACLE Controller are not needed. The Basic Controller

allows for linear (side to side) movement, with adjustable speed control

and has built in 0.5 second of digital dampening for starts / stops.

SettING OperatION MODe

This section outlines the procedure to

change the operating mode on the Ba-

sic Controller.

1. Turn the SPEED knob all the way to

the left (counter-clockwise).

2. Press and release both DIRECTION-

AL buttons at the same time to cycle

through the three operation modes.

3. The LED color indicates the current

operation mode:

Green: Momentary Mode

Orange: Continuous (Toggle) Mode

Red: Pulse Mode

MOMeNtary MODe

When the Basic Controller LED is Green,

the unit is in Momentary mode. Below

are the operation procedures for this

mode.

1. Set the SPEED knob to a speed that

you desire.

2. Press and hold one of the DIREC-

TIONAL buttons to start your move.

3. Once your move is complete, release

the DIRECTIONAL Button.

CONtINuOuS (tOGGle) MODe

When the Basic Controller LED is Or-

ange, the unit is in Continuous mode.

Below are the operation procedures for

this mode.

1. Set the SPEED knob to a speed that

you desire.

2. Press one of the DIRECTIONAL but-

tons to start your move.

3. Press a DIRECTIONAL button again

to stop your move.

pulSe MODe

The CineSlider drag control can be used

to adjust resistance of the carriage mo-

tion.

1. Set the SPEED knob to a speed that

you desire:

PositionSpeedknobto1for:

Slow•1LEDFlash•(Speed1)

Use for horizontal moves with light

loads.

PositionSpeedknobto3for:

Medium•2LEDFlashes•(Speed2)

Use for horizontal moves with heavy

loads or vertical moves with light

loads (Turn knob to Speed 5 if cart is

not moving due to low power).

PositionSpeedknobto5for:

Fast•3LEDFlashes•(Speed3)

Use for most vertical moves.

2. Press & Release both DIRECTIONAL

buttons to conrm.

3. Set the Speed knob to a Delay time

that you desire. This is indicated by

a Red LED, you can adjust the Motor

Off time (Delay) from 50 milliseconds

to 2.2 seconds The Motor On time is

always a constant of 50 milliseconds

and represented by a Green LED.

4. Press & Release one of the DIREC-

TIONAL buttons to start your move.

5. Press a DIRECTIONAL button to stop

your move.

Note: If doing advanced time lapse

work, we highly recommend our OR-

ACLE controller. It will provide much

greater precision and a broad range of

useful features.

basic controller

CONNeCtING the CONtrOller

The Basic Controller offers three user

selectable operation modes.

1. Plug one end of the provided cat-5

network cable into the basic control-

ler.

2. Plug the other end of the cat-5 cable

into your elektraDrive motor attached

to your dolly/slider.

3. Connect the power cord to the con-

troller. The Basic Controller can be

adapter or an optional 12 volt battery.

pack with 12v DC Adapter.

Résumé du contenu

Page 1

elektraDrIVe BaSIC CONtrOller GuIDeaVaIlaBle MODeSThe Basic Controller offers three user selectable operation modes.• MOMENTARYMODE: This mode allow

Commentaires sur ces manuels

Pas de commentaire

Kessler MOTION CONTROL: elektraDRIVE Basic Controller (iOS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour la vidéo Kessler MOTION CONTROL: elektraDRIVE Basic Controller (iOS. Kessler MOTION CONTROL: elektraDRIVE Basic Controller (iOS) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Kessler MOTION CONTROL: elektraDRIVE Basic Controller (iOS